Get ready for the holiday rush
Clean syrup lines, swap worn fittings, and replace the nozzles, washers and filter cartridges that fail first, before your busiest weeks of the year. Everything ships same-day or is ready for pickup in Kansas City and Denver.
Six jobs to do before the rush
Sanitize syrup lines
Snap BIB cleaning adapters onto your connectors and run sanitizer through every line to the valves before the rush.
Shop cleaning supplies →Switch to push-in fittings
Replace weeping barb joints with push-in elbows, shutoffs and check valves. No clamps, and repairs take minutes.
Shop fittings and tubing →Replace tired tubing
Cloudy, stiff tubing holds flavor and leaks at fittings. Barrier tubing has a smooth liner that's easier to sanitize.
Shop beverage tubing →Fix drips and foam
New diffusers, nozzles and stem washers stop dripping valves and foamy pours. Re-check brix after service.
Shop wear parts →Seal up the CO₂ side
A fresh washer at every cylinder change and a rebuilt regulator keep soda from going flat mid-shift.
Shop CO₂ washers →Change filter cartridges
Reset the date on fountain, ice and coffee water filters so flow, taste and scale protection hold through the season.
Shop water filtration →Barb and clamp vs. push-in fittings
You don't have to re-plumb the whole system. Converting the joints you open most often is where push-in fittings save the most time.
| Barb and clamp | Push-in fitting | |
|---|---|---|
| How it connects | Tubing pushed over a barb and crimped with a clamp | Tubing pushed into the fitting until it locks |
| Tools needed | Tubing cutter, clamps and a pincer tool | Tubing cutter |
| Disconnecting | Cut the clamp off and re-crimp a new one | Press the collet and pull the tube out |
| Tubing size | Matched to the tubing ID | Matched to the tubing OD |
| Inline options | Separate barbed valves and tees | Elbows, wyes, shutoffs, check valves and strainers on one connection |
| Best for | Joints you rarely open | Joints you service often: filters, carbonator inlets, bar shutoffs |
Keeping barbs? Stock up on stepless clamps and a pincer tool.
Pre-holiday service checklist
3–4 weeks out
Walk the system, note leaks, cloudy tubing and filter dates, and order parts
2 weeks out
Replace filter cartridges, CO₂ washers and worn BIB connectors
2 weeks out
Replace worn tubing and leaking joints; add shutoffs
1 week out
Sanitize syrup lines; service nozzles, diffusers and stem washers
1 week out
Check brix, clean coffee pots and servers, clean condenser coils
Every night
Soak nozzles and diffusers; wipe down valves, guns and drip trays
Source: Foxx Holiday Rush Prep guide
Shop the holiday prep list
Every part from our prep guide, grouped by job.
BIB cleaning adapters, sanitizers, brushes and cleaners to get soda, coffee and ice equipment clean before the holiday rush.
20-1110-20
Cleaning Adapter for Bag-in-Box (BIB), Red Coke Screw-On
Log in for price and availability
60-20-1710-30
Cleaning Adapter for Bag-in-Box (BIB), Blue Scholle Screw-On
Log in for price and availability
CA-Q51F
Cleaning Adapter-For Bag-in-Box QCD II, Pcs, Encore
Log in for price and availability
13002A
National Chemicals BTF Chlor Tab, Chloromelamine Sanitizer, 100 Tablets
Log in for price and availability
41083
National Chemicals Ice Machine Cleaner, Non-Hazardous, 1 Gallon
Log in for price and availability
Q249
QuestVapco Brilliance, Stainless Steel Cleaner & Polisher, 14.5 Oz
Log in for price and availability
MSTRCTN 12/12/4
Petrol Gel Sanitary Lubricant for O-Rings, Gaskets, and Fittings, 4 Oz
Log in for price and availability
Push-in fittings, stepless clamps, barrier tubing and the tools to cut and crimp them.
ADMF 0606-200MS
DMfit Push-In Strainer, 3/8" OD x 3/8" OD, 200 Mesh
Log in for price and availability
AMC0606
DMfit Push-In Adapter, 3/8" Male Pipe Thread x 3/8" OD
Log in for price and availability
SI041212S
John Guest Superseal Coupling, 3/8" OD (Stainless Steel) x 3/8" OD
Log in for price and availability
16700016-100
Oetiker Stepless Clamp, 0.520 - 0.618 in (15.7 mm), Stainless Steel
Log in for price and availability
14100498
Oetiker Clamp Pincer, Straight Handles, Side Jaws
Log in for price and availability
235-0662X500
Bev-Seal Ultra Series 235 Barrier Tubing, Translucent White, 1/4" ID x 3/8" OD, 500 ft
Log in for price and availability
Nozzles, diffusers, valve stems, O-rings, BIB connectors and regulator kits that wear out first.
82-2014/03-SP
Lancer Nozzle Assembly for 2-Shot LEV, 4.5 oz/sec
Log in for price and availability
Replacement cartridges and filter systems for fountain, ice and coffee water.
EV9612-55
Everpure EV9612-55 MC² Water Filter Cartridge, 0.5 Micron, 1.67 GPM
Log in for price and availability
EV9613-26
Everpure EV9613-26 MH2 Water Filter Cartridge, 0.2 Micron, 1.67 GPM
Log in for price and availability
EV9618-26
Everpure EV9618-26 7CB5-S Water Filter Cartridge, 5 Micron, 2.5 GPM
Log in for price and availability
56133-07
3M HF45 High Flow Series Water Filter Cartridge for Cold Beverages
Log in for price and availability
EV9275-01
Everpure EV9275-01 QC71 Single MC² Filtration System, 0.5 Micron, 1.67 GPM
Log in for price and availability
56160-02
3M BREW125-MS High Flow Series Water Filtration System with Scale Inhibitor, For Coffee and Tea Applications
Log in for price and availability
SCL6-B
Omnipure Inline Water Filter with Scale Inhibitor, 6"
Log in for price and availability
Not sure which part fits your system?
Send us a photo or a part number and our team will match the right fitting, connector or cartridge. Same-day shipping and pickup from Kansas City and Denver.
Step-by-step fixes: read our holiday rush prep guide and our bar gun troubleshooting guide.